Tag Archives: RFID tag

December 1, 2016

Camelback Holiday Village and Aquatopia Water Park Use RFID Wristband System

The Camelback Holiday Village and Aquatopia Indoor Water Park located on Mount Pocono, that application RFID wristband system to access control, cashless payment and locker rental. The RFID wristband have a 13.56MHz passive RFID tag inside, it can apply to guest room, attractions brake machine and the data validation of sales. If you stay in Cameback […]

Industry News
November 11, 2016

Radio Frequency Identification (RFID)

Radio Frequency Identification (RFID) refers to a wireless system comprised of two components: tags and readers. The reader is a device that has one or more antennas that emit radio waves and receive signals back from the RFID tag. Tags, which use radio waves to communicate their identity and other information to nearby readers, can […]

Industry News
September 5, 2016

What Is Passive RFID Solution

Passive RFID card provides advanced sensitivity for enhanced read rates and range. The read range of passive UHF systems can be as long as 12 m, and UHF RFID has a faster data transfer rate than LF or HF. UHF RFID is the most sensitive to interference, but many UHF product manufacturers have found ways […]

Industry News
August 19, 2016

What are the different ways to mount an RFID Tag?

An RFID Tag can be attached on a wide range of surfaces including wood, plastic, metal, glass, fabric. The mounting surface also affect on the read range, performance and cost of a tag. The on-metal tags are especially designed to provide high performance on metal surfaces, and they are typical more expensive than other RFID tags. […]

FAQ
August 18, 2016

What is RFID tag and reader collision?

What is RFID tag and reader collision? Here i will through two step intruduce their difference. RFID tag and reader collision have difference work areas. What is RFID tag collision? RFID tag collision is a situation where multiple tags reflect signals back to the reader in the exact same time frame, causing data confusion and incorrect identification. Although there […]

FAQ
August 18, 2016

How much information can an RFID tag store?

How much information can an RFID tag store? It depends on the vendor and the application, but typically a tag would carry no more than 2KB of data—enough to store some basic information about the item it is on. Companies are now looking at using a simple “license plate” tag that contains only a 96-bit serial […]

FAQ
August 18, 2016

What is an RFID tag made up of?

What is an RFID tag made up of? The basic components of an RFID tag can be divided into two parts. First, an integrated circuit for the purpose of data storing and processing, radio wave modulating and demodulating, and capturing power from reader’s radio waves.  Second, an antenna for enhancing signal transmission. What is an […]

FAQ
August 18, 2016

What is an RFID tag?

What is an RFID tag? Increasingly, RFID tagging is used in supply chain management as an alternative to bar code technology. RFID tags that contain their own power source are known as active tags. Those without a power source are known as passive tags. A passive tag is briefly activated by the radio frequency ( […]

FAQ
August 16, 2016

What are the advantages of RFID tags?

Advantages of RFID tags, RFID has many advantages over barcodes, but barcodes have become a standard in many industries for many worthwhile reasons. Depending on the application, either system will have its strengths and weaknesses. When it comes time for you to make a decision between either system, keep the initial and recurring costs in mind, as […]

FAQ
  • 1
  • 2